Automatic vacuum vulcanizing machine

Product Details

Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir, this process requires for 4-6 minutes (because the adhesive is easy to cure, so stir it when use)

Weight the rubber granulates stirred, according to the granulates thickness requirement of the tiles

Paving the rubber granulates weighted on the mold, then floated it by trowel
Firstly paving the surface rubber granulates which is fine and color, thenthe thickness and black

Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of vulcanization accord to the thickness of the rubber tiles, in general, 3-8inutes finished
After that, mold separate automatic, then remove floor tile on the shelves to dry

Inspect the surface of the floor tiles formity, no aberration, no flaw, line with the product quality

This kind machinery has three types of frame type, pillar type, and jaw type
It is economical, advantage of compact structure, high working pressure, high producing efficiency
Operation is safe and reliable
This series of products have high press in unit area , so that we can ensure the quality
Machine can be equipped with model pulling and pushing device to reduce work strength based on product requirements
Hand control, electrical control and PLC control is optional
Working layer number can be designed as the request
Valcanization process can achieve many procedures for automatic control, can automatically detect and adjust hot plate rubber machine
This type of machine is control by PLC, valcanization process can achieve many procedures for automatic control ,can automatically detect and adjust hot plate rubber

type	100T	200T	250T	300T	500T
stroke(mm)	250	250	250	250	300
working table(mm)	400*400	503*508	600*600	650*650	650*740
piston diameter(mm)	250	355	400	450	560
electrical heater(kW)	13	13	15	15	17
Motor HP(kW)	10HP	10HP×2	10HP×2	10HP×2	15HP×2
vacuum pump motor(kW)	4HP	4HP	4HP	4HP	4HP
total power(kW)	20	28	30	30	32
mold opening method	(up lift/down drop) (in/out mold) 2RT(front ejector) 3RT(middle mold) 4RT(top mold)